Jan De Landtsheer
ad0a06e267
Summary of changes (with references):\n\nModules + PHY coverage\n- Curated and normalized stage1 list in [config.modules.conf](config/modules.conf:1):\n - Boot-critical storage, core virtio, common NICs (Intel/Realtek/Broadcom), overlay/fuse, USB HCD/HID.\n - Added PHY drivers required by NIC MACs:\n * realtek (for r8169, etc.)\n * broadcom families: broadcom, bcm7xxx, bcm87xx, bcm_phy_lib, bcm_phy_ptp\n- Robust underscore↔hyphen aliasing during copy so e.g. xhci_pci → xhci-pci.ko, hid_generic → hid-generic.ko:\n - [bash.initramfs_copy_resolved_modules()](scripts/lib/initramfs.sh:990)\n\nFirmware policy and coverage\n- Firmware selection now authoritative via [config/firmware.conf](config/firmware.conf:1); ignore modules.conf firmware hints:\n - [bash.initramfs_setup_modules()](scripts/lib/initramfs.sh:229)\n - Count from firmware.conf for reporting; remove stale required-firmware.list.\n- Expanded NIC firmware set (bnx2, bnx2x, tigon, intel, realtek, rtl_nic, qlogic, e100) in [config.firmware.conf](config/firmware.conf:1).\n- Installer enforces firmware.conf source-of-truth in [bash.alpine_install_firmware()](scripts/lib/alpine.sh:392).\n\nEarly input & build freshness\n- Write a runtime build stamp to /etc/zero-os-build-id for embedded initramfs verification:\n - [bash.initramfs_finalize_customization()](scripts/lib/initramfs.sh:568)\n- Minor init refinements in [config.init](config/init:1) (ensures /home, consistent depmod path).\n\nRebuild helper improvements\n- [scripts/rebuild-after-zinit.sh](scripts/rebuild-after-zinit.sh:1):\n - Added --verify-only; container-aware execution; selective marker clears only.\n - Prints stage status before/after; avoids --rebuild-from; resolves full kernel version for diagnostics.\n\nRemote flist readiness + zinit\n- Init scripts now probe BASE_URL readiness and accept FLISTS_BASE_URL/FLIST_BASE_URL; firmware target is /lib/firmware:\n - [sh.firmware.sh](config/zinit/init/firmware.sh:1)\n - [sh.modules.sh](config/zinit/init/modules.sh:1)\n\nContainer, docs, and utilities\n- Stream container build logs by calling runtime build directly in [bash.docker_build_container()](scripts/lib/docker.sh:56).\n- Docs updated to reflect firmware policy, runtime readiness, rebuild helper, early input, and GRUB USB:\n - [docs.NOTES.md](docs/NOTES.md)\n - [docs.PROMPT.md](docs/PROMPT.md)\n - [docs.review-rfs-integration.md](docs/review-rfs-integration.md)\n- Added GRUB USB creator (referenced in docs): [scripts/make-grub-usb.sh](scripts/make-grub-usb.sh)\n\nCleanup\n- Removed legacy/duplicated config trees under configs/ and config/zinit.old/.\n- Minor newline and ignore fixes: [.gitignore](.gitignore:1)\n\nNet effect\n- Runtime now has correct USB HCDs/HID-generic and NIC+PHY coverage (Realtek/Broadcom), with matching firmware installed in initramfs.\n- Rebuild workflow is minimal and host/container-aware; docs are aligned with implemented behavior.\n
3.1 KiB
3.1 KiB
AGENTS.md
This file provides guidance to agents when working with code in this repository.
Non-obvious build/run facts (read from scripts):
- Always build inside the containerized toolchain; ./scripts/build.sh will spawn a transient container, or use the persistent dev container via ./scripts/dev-container.sh start then ./scripts/dev-container.sh build.
- The incremental pipeline is stage-driven with .build-stages markers; list status via ./scripts/build.sh --show-stages and force a subset with --rebuild-from=.
- Outputs are anchored to PROJECT_ROOT (normalized in bash.common.sh):
- Kernel: dist/vmlinuz.efi (created by bash.kernel_build_with_initramfs())
- Initramfs archive: dist/initramfs.cpio.xz (created by bash.initramfs_create_cpio())
- Kernel embeds the initramfs (CONFIG_INITRAMFS_SOURCE set by bash.kernel_modify_config_for_initramfs()); no separate initrd is required in normal flow.
Fast iteration helpers (init/zinit/modules.conf):
- Use ./scripts/rebuild-after-zinit.sh to re-copy /init, re-apply zinit, re-resolve/copy modules, and recreate the cpio (initramfs-only by default).
- Flags: --with-kernel (also re-embed kernel; forces --rebuild-from=initramfs_create), --refresh-container-mods (rebuild container /lib/modules if missing), --verify-only (report changes since last cpio).
- DEBUG=1 shows full safe_execute logs and stage timings.
Critical conventions (avoid breakage):
- Use logging/safety helpers from bash.common.sh: log_info/warn/error/debug, safe_execute, section_header.
- Paths must be anchored to PROJECT_ROOT (already normalized after sourcing config) to avoid CWD drift (kernel builds cd into kernel/current).
- Do not edit /etc/shadow directly; passwordless root is applied by chroot ${initramfs_dir} passwd -d root in bash.initramfs_finalize_customization().
- initdebug=true on kernel cmdline opens an early shell from config/init even without /init-debug.
Modules and firmware (non-obvious flow):
- Container /lib/modules/<FULL_VERSION> is the authoritative source for dependency resolution and copying into initramfs (ensure kernel_modules stage ran at least once).
- RFS firmware pack now installs all linux-firmware* into container and packs from /lib/firmware; runtime overmount targets /lib/firmware (not /usr/lib/firmware).
Troubleshooting gotchas:
- If “Initramfs directory not found: initramfs” or kernel output in wrong place, path anchoring patches exist in bash.initramfs_create_cpio(), bash.initramfs_validate(), and bash.kernel_build_with_initramfs(); ensure DEBUG logs show “... anchored to PROJECT_ROOT”.
- On host, the rebuild helper delegates to ./scripts/dev-container.sh so you don’t need to manually start the container.
Utilities:
- Create BIOS+UEFI USB with embedded-initramfs kernel: sudo ./scripts/make-grub-usb.sh /dev/sdX --kparams "console=ttyS0 initdebug=true" (use --with-initrd only if you want a separate initrd on ESP).